Is
there any special care for SpeedFilm once it is installed?
Once installed,
refrain from washing the vehicle for at least 48 hours.
We suggest you keep the vehicle in the sun to help cure
and dry the protective film. Washing after that time presents
no problem, but be careful if using a pressure washer along
leading edges of film. When waxing the vehicle, some wax
may build up along the film edges. This wax build up can
easily be removed with a soft toothbrush.
Can
the film be polished?
Yes, we suggest keeping it polished, but not absolutely necessary.
Keeping the material waxed or polished helps prevent road
debris from adhering to its surface (i.e., bugs and tar).
It makes clean up a snap! Plexus plastic cleaner and polish
is the best to use.
Will
SpeedFilm ever turn yellow?
SpeedFilm resists yellowing because the film is
constructed of thermoplastic urethane, a tough, conformable
material that is covered by a clear coat layer. The film
contains UV protection to counteract harmful ultraviolet
rays that can cause yellowing.
|
 |
When should I have SpeedFilm applied to my car?
You can have SpeedFilm applied at any time. The best
time to have SpeedFilm applied is when the car is new or has
not sustained much road wear. Several Atlanta area dealerships
can have SpeedFilm applied for you at your request. If your
dealership does not offer this service, just choose the installer
nearest you.
Can
anyone properly install a SpeedFilm kit?
There are precise conditions and specific techniqes
for applying the film. To insure the best results and guarantee
your warranty, SpeedFilm should be applied by a professional
SpeedFilm technician.
How
long will the installation take to complete?
Most installations take between four to six hours in duration.
|
